diff options
author | Sungbo Eo <mans0n@gorani.run> | 2019-09-27 00:16:33 +0900 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-17 13:36:11 +0100 |
commit | 38bdfcdb87e9b3a1232e9820bd6534da4c28282b (patch) | |
tree | 0d548e896d109870cb6b7f71a7b0e3f8379bcaa8 /target/linux/ramips/dts/mt7620a_iptime.dtsi | |
parent | 01d39cd18c4035e362f179548cd2c051aac03042 (diff) | |
download | upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.gz upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.bz2 upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.zip |
ramips: add support for ipTIME A104ns
ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100Mbps
- Switch: SoC internal
- USB: 1x 2.0
- UART:
- J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
In contrast to to-be-supported A1004ns, the A104ns has no usable
value in 0x1fc40 (uboot), so wan_mac needs to be calculated.
Also note that GPIOs for the LEDs really are inverted compared to
the A1004ns.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[moved state_default to device DTS, reordered properties in wmac,
added comment about wan_mac and LED GPIOs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts/mt7620a_iptime.dtsi')
-rw-r--r-- | target/linux/ramips/dts/mt7620a_iptime.dtsi | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7620a_iptime.dtsi b/target/linux/ramips/dts/mt7620a_iptime.dtsi new file mode 100644 index 0000000000..5a6fdacb52 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_iptime.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + label-mac-device = ðernet; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "config"; + reg = <0x20000 0x10000>; + read-only; + }; + + firmware: partition@30000 { + compatible = "denx,uimage"; + label = "firmware"; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&uboot 0x1fc20>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&uboot 0x1f800>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <0>; + led-active-low; + }; + }; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&wled_pins>; + + ralink,mtd-eeprom = <&uboot 0x1f400>; +}; |