diff options
| author | Kip Porterfield <kip.porterfield@gmail.com> | 2019-02-03 13:54:18 -0500 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-03-02 13:04:45 +0100 |
| commit | f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3 (patch) | |
| tree | cc3f4fc38a629e19a0939adde82b30c6cdf9d849 /target/linux/ramips/dts/ZBT-WR8305RT.dts | |
| parent | 6c558bae648ea8bca8fc8fcbee760a0cdc9ca9c9 (diff) | |
| download | upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.gz upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.bz2 upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.zip | |
ramips: add support for Belkin F9K1109v1
Device specification:
- SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz
- RAM: 64Mb
- Flash: 8MB (SPI-NOR)
- Ethernet: 10/100/1000 Mbps
- WLAN
Wireless 1: SoC-integrated : 2.4/5 GHz
Wireless 2: 2.4 GHz RT3092L
- LED: 2x USB, WAN, LAN
- Key: WPS, reset
- Serial: 4-pin header, (57600,8,N,1), 3.3V TTL,
GND, RX, TX, V - J12 marking on board
- USB ports: 2 x USB 2.0
Flashing instructions:
Option 1 (from bootloader web)
- Hold reset button on the back of router when plugging
in power (for at-least 10 seconds after plugged in)
- Connect to a Lan port
- Set computer IP to 10.10.10.3
- Go to http://10.10.10.123 in a web browser
- Click the Browse... Button and select the
*squashfs.sysupgrade.bin file then click APPLY
Option 2 (from the stock admin web)
- Go to firmware upgrade
- Upload the **factory** image *initramfs.bin first
- Boot into openwrt
- From Luci web in openwrt upload the *squashfs.sysupgrade.bin
Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added v1 to the compatible identifier, added pciid for
the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi
to prepare for a possible F9K1103 patch]
Diffstat (limited to 'target/linux/ramips/dts/ZBT-WR8305RT.dts')
0 files changed, 0 insertions, 0 deletions