ramips/rt288x,rt3883: Name DTS files based on scheme

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 186 deletions

diff --git a/target/linux/ramips/dts/WLR-6000.dts b/target/linux/ramips/dts/WLR-6000.dts
deleted file mode 100644
index 2b1f707658..0000000000
--- a/target/linux/ramips/dts/WLR-6000.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-/dts-v1/;
-
-#include "rt3883.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
-	model = "Sitecom WLR-6000";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "wlr-6000:red:power";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		ops {
-			label = "wlr-6000:white:ops";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "jtag", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&factory 0x8004>;
-	mtd-mac-address-increment = <1>;
-
-	port@0 {
-		phy-handle = <&phy0>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			phy-mode = "rgmii";
-
-			qca,ar8327-initvals = <
-				0x04 0x07600000 /* PORT0 PAD MODE CTRL */
-				0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-				0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
-				0x50 0xc437c437 /* LED Control Register 0 */
-				0x54 0xc337c337 /* LED Control Register 1 */
-				0x58 0x00000000 /* LED Control Register 2 */
-				0x5c 0x03ffff00 /* LED Control Register 3 */
-				0x7c 0x0000007e /* PORT0_STATUS */
-				0x94 0x0000007e /* PORT6 STATUS */
-			>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <8600000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0x713000>;
-			};
-
-			partition@763000 {
-				label = "manufacture";
-				reg = <0x763000 0x7D000>;
-				read-only;
-			};
-
-			partition@7E0000 {
-				label = "backup";
-				reg = <0x7E0000 0x10000>;
-				read-only;
-			};
-
-			partition@7F0000 {
-				label = "storage";
-				reg = <0x7F0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pci {
-	status = "okay";
-};
-
-&pci1 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "pci1814,3091";
-		reg = <0x10000 0 0 0 0>;
-		ralink,mtd-eeprom = <&factory 0x8000>;
-	};
-};
-
-&wmac {
-	status = "okay";
-	ralink,2ghz = <0>;
-	ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};