diff options
| author | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-26 16:21:34 +0100 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-02-22 23:40:11 +0100 |
| commit | f1c193c27e714a051b49788fff3aecbd728190e1 (patch) | |
| tree | 96de333820159b99516114bf11b68b361674c351 /target/linux/ramips/dts/WL-351.dts | |
| parent | 8c64824576598117958691853de68bf4dcfc3c06 (diff) | |
| download | upstream-f1c193c27e714a051b49788fff3aecbd728190e1.tar.gz upstream-f1c193c27e714a051b49788fff3aecbd728190e1.tar.bz2 upstream-f1c193c27e714a051b49788fff3aecbd728190e1.zip | |
ramips: add support for ALFA Network AWUSFREE1
ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628.
Specification:
- MT7628AN (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203)
- 2x detachable antennas (RP-SMA)
- ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0)
- 4x LED (2 driven by GPIO)
- 1x button (reset)
- 1x mini USB for host and main power input
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
1. Power device with reset button pressed and release it after ~5 sec.
2. Setup static IP 192.168.1.2/4 on your PC.
3. Go to 192.168.1.1 in browser and upload "sysupgrade" image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/WL-351.dts')
0 files changed, 0 insertions, 0 deletions