ramips: add support for mqmaker witi 512mb version

Splitted out the dts file and create the new dts for the 256 MByte RAM and
the 512 MB RAM version.

Migrate both versions to the common board detection.

The install the 512 MByte Version on a board running the 256 MByte image,
a forceful sysupgrade with the -F flag is required.

Signed-off-by: Davide Ammirata <list@davidea.it>

1 files changed, 0 insertions, 121 deletions

diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts
deleted file mode 100644
index 097c8163ff..0000000000
--- a/target/linux/ramips/dts/WITI.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "mqmaker,witi", "mediatek,mt7621-soc";
-	model = "MQmaker WiTi";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	palmbus: palmbus@1E000000 {
-		i2c@900 {
-			status = "okay";
-
-			pcf8563: rtc@51 {
-				status = "okay";
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		m25p,chunked-io = <32>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0xfb0000>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-
-	pcie0 {
-		mt76@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x8000>;
-			ieee80211-freq-limit = <5000000 6000000>;
-			mtd-mac-address = <&factory 0xe000>;
-		};
-	};
-
-	pcie1 {
-		mt76@1,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&factory 0x0000>;
-			ieee80211-freq-limit = <2400000 2500000>;
-			mtd-mac-address = <&factory 0xe000>;
-		};
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0xe000>;
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "wdt", "rgmii2", "jtag", "mdio";
-			ralink,function = "gpio";
-		};
-	};
-};