ramips: add flash size postfix to Widora neo

Rename the Widora neo by adding a flash size prefix. Move the common parts
into a dtsi to be prepare everything for upcomming support of the 32MB
version.

Migrate the Widora neo to the generic board detection as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 171 deletions

diff --git a/target/linux/ramips/dts/WIDORA-NEO.dts b/target/linux/ramips/dts/WIDORA-NEO.dts
deleted file mode 100644
index 195e80605b..0000000000
--- a/target/linux/ramips/dts/WIDORA-NEO.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "widora,neo", "mediatek,mt7628an-soc";
-	model = "Widora-NEO";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wifi {
-			label = "widora:orange:wifi";
-			gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		wps {
-			label = "reset";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	wgpio: gpio-wifi {
-		compatible = "mediatek,gpio-wifi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "gpio";
-			ralink,function = "gpio";
-		};
-
-		perst {
-			ralink,group = "perst";
-			ralink,function = "gpio";
-		};
-
-		refclk {
-			ralink,group = "refclk";
-			ralink,function = "gpio";
-		};
-
-		i2s {
-			ralink,group = "i2s";
-			ralink,function = "gpio";
-		};
-
-		spis {
-			ralink,group = "spis";
-			ralink,function = "gpio";
-		};
-
-		wled_kn {
-			ralink,group = "wled_kn";
-			ralink,function = "gpio";
-		};
-
-		wled_an {
-			ralink,group = "wled_an";
-			ralink,function = "wled_an";
-		};
-
-		wdt {
-			ralink,group = "wdt";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-
-&spi0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		m25p,chunked-io = <31>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0x0fb0000>;
-		};
-	};
-
-	spidev@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "linux,spidev";
-		reg = <1>;
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&i2c {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&pwm {
-	status = "okay";
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&sdhci {
-	status = "okay";
-	mediatek,cd-low;
-};
-
-&wmac {
-	status = "okay";
-};