aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/WHR-600D.dts
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2019-01-09 00:20:18 +0900
committerChristian Lamparter <chunkeey@gmail.com>2019-02-14 16:56:14 +0100
commitf305ce5c3577005aba5b870b373e65aaf9ede3ec (patch)
tree92801a53052461f74ca6e28bcf2d40c68fb1022a /target/linux/ramips/dts/WHR-600D.dts
parentdee8db441e480e7d581447f43219596f6dd9542a (diff)
downloadupstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.gz
upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.bz2
upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.zip
ramips: add support for I-O DATA WN-AC1167GR
I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification: - SoC : MediaTek MT7620A - RAM : DDR2 64 MB - Flash : SPI-NOR 8MB - WLAN : 2.4/5 GHz, 2T2R - 2.4 GHz: MT7620A (SoC) - 5 GHz : MT7612E - Ethernet: 10/100/1000 Mbps (ext. MT7530) - LED/key : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J2: TX, GND, RX, Vcc from SoC side - 115200n8 Flash instruction using factory image: 1. Boot WN-AC1167GR normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/WHR-600D.dts')
0 files changed, 0 insertions, 0 deletions