aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/VOCORE2.dts
diff options
context:
space:
mode:
authorAndrew Yong <me@ndoo.sg>2017-01-08 14:30:10 +0800
committerMathias Kresin <dev@kresin.me>2017-01-13 08:32:35 +0100
commit3f31029b190417e12f4d19d9999cd52ec76d0f85 (patch)
tree93a92ab8ccc6b8e55af209e4c86788f47046e7bf /target/linux/ramips/dts/VOCORE2.dts
parentd7fd1a0f8da37a978b138b2966c12d06bda55df5 (diff)
downloadupstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.gz
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.bz2
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.zip
ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary "ultimate" dock. Specifications: - SoC: MediaTek MT7628AN (580MHz, ramips) - RAM: 128MB DDR2 166MHz - Storage: 16MB NOR SPI flash onboard + microSD slot on dock - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2 boards with onboard 1x chip antenna - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header - Dock hardware: - USB 2.0 socket - MicroSD socket - 100Mbps Ethernet x1 - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S DAC/ADC (support WIP) - Micro USB for power and console (UART2) Initial installation: - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on SSID "VoCore2" - Connect to VoCore2 by Ethernet or Wi-Fi - `ssh root@192.168.1.1` (password is "vocore") - scp/wget/etc. LEDE sysupgrade.bin to VoCore2 - `sysupgrade -n <your image>.bin` (don't keep old config, as the original firmware uses Ralink SDK Wi-Fi drivers and not mt76+mac80211) - after sysupgrade completes, Wi-Fi will be disabled by default so use Ethernet or the micro USB console to configure Wi-Fi again Signed-off-by: Andrew Yong <me@ndoo.sg>
Diffstat (limited to 'target/linux/ramips/dts/VOCORE2.dts')
-rw-r--r--target/linux/ramips/dts/VOCORE2.dts123
1 files changed, 123 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/VOCORE2.dts b/target/linux/ramips/dts/VOCORE2.dts
new file mode 100644
index 0000000000..297cd1bb99
--- /dev/null
+++ b/target/linux/ramips/dts/VOCORE2.dts
@@ -0,0 +1,123 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "vocore,VoCore2", "mediatek,mt7628an-soc";
+ model = "VoCore2";
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "vocore2:fuchsia:status";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "refclk", "gpio";
+ ralink,function = "gpio";
+ };
+
+ agpio {
+ ralink,group = "agpio";
+ ralink,function = "uart2";
+ };
+ };
+
+ uart1_pins: uart1 {
+ uart1 {
+ ralink,group = "uart1";
+ ralink,function = "uart1";
+ };
+ };
+
+ uart2_pins: uart2 {
+ uart2 {
+ ralink,group = "spis";
+ ralink,function = "pwm";
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x7>;
+ mediatek,portdisable = <0x3a>;
+};
+
+&i2s {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};