diff options
| author | Peter Lundkvist <peter.lundkvist@gmail.com> | 2018-03-17 18:47:51 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-03-18 22:22:38 +0100 |
| commit | d13b05741a4d05a271d26fc3be61e76530025098 (patch) | |
| tree | fe804b278be33f45ff11b7994ece4d846a1e2423 /target/linux/ramips/dts/VAR11N-300.dts | |
| parent | a5bd8de0bd80b83e43ce90ddc6623890344ad33d (diff) | |
| download | upstream-d13b05741a4d05a271d26fc3be61e76530025098.tar.gz upstream-d13b05741a4d05a271d26fc3be61e76530025098.tar.bz2 upstream-d13b05741a4d05a271d26fc3be61e76530025098.zip | |
ramips: add support for TP-Link TL-WR902AC v3
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.
Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
* MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment.
Therefore 5Ghz won' work.
Flash instruction:
The only way to flash LEDE image in TL-WR902AC v3 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with the LAN port, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
[drop p2led_an pinmux, this pin isn't used as gpio, fix whitespace issues]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/dts/VAR11N-300.dts')
0 files changed, 0 insertions, 0 deletions