diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2019-01-09 00:20:18 +0900 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-02-14 16:56:14 +0100 |
| commit | f305ce5c3577005aba5b870b373e65aaf9ede3ec (patch) | |
| tree | 92801a53052461f74ca6e28bcf2d40c68fb1022a /target/linux/ramips/dts/TL-WR840NV5.dts | |
| parent | dee8db441e480e7d581447f43219596f6dd9542a (diff) | |
| download | upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.gz upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.bz2 upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.zip | |
ramips: add support for I-O DATA WN-AC1167GR
I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.
Specification:
- SoC : MediaTek MT7620A
- RAM : DDR2 64 MB
- Flash : SPI-NOR 8MB
- WLAN : 2.4/5 GHz, 2T2R
- 2.4 GHz: MT7620A (SoC)
- 5 GHz : MT7612E
- Ethernet: 10/100/1000 Mbps (ext. MT7530)
- LED/key : 4x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J2: TX, GND, RX, Vcc from SoC side
- 115200n8
Flash instruction using factory image:
1. Boot WN-AC1167GR normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/TL-WR840NV5.dts')
0 files changed, 0 insertions, 0 deletions