ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 27 insertions, 23 deletions

diff --git a/target/linux/ramips/dts/NW718.dts b/target/linux/ramips/dts/NW718.dts
index 26bdc0b72f..c87a8d3cfb 100644
--- a/target/linux/ramips/dts/NW718.dts
+++ b/target/linux/ramips/dts/NW718.dts
@@ -54,33 +54,37 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-
-		partition@30000 {
-			label = "config";
-			reg = <0x30000 0x20000>;
-			read-only;
-		};
-
-		factory: partition@50000 {
-			label = "factory";
-			reg = <0x50000 0x10000>;
-			read-only;
-		};
-
-		partition@60000 {
-			label = "firmware";
-			reg = <0x60000 0x3a0000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "config";
+				reg = <0x30000 0x20000>;
+				read-only;
+			};
+
+			factory: partition@50000 {
+				label = "factory";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "firmware";
+				reg = <0x60000 0x3a0000>;
+			};
 		};
 	};
 };