ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 27 insertions, 23 deletions

diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts
index f6020d63a4..fadb484f39 100644
--- a/target/linux/ramips/dts/NA930.dts
+++ b/target/linux/ramips/dts/NA930.dts
@@ -18,31 +18,35 @@
 	};
 
 	nand {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "mtk,mt7620-nand";
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x20000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "factory";
-			reg = <0x200000 0x40000>;
-			read-only;
-		};
-
-		partition@240000 {
-			label = "Config";
-			reg = <0x240000 0x400000>;
-			read-only;
-		};
-
-		partition@640000 {
-			label = "firmware";
-			reg = <0x640000 0x1400000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "factory";
+				reg = <0x200000 0x40000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "Config";
+				reg = <0x240000 0x400000>;
+				read-only;
+			};
+
+			partition@640000 {
+				label = "firmware";
+				reg = <0x640000 0x1400000>;
+			};
 		};
 	};