ramips: DTS rework

Add node aliases to dtsi files.
Reword dts files so they're more in-line with upstream.
Fix some more warnings and errors reported by dtc

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

1 files changed, 87 insertions, 89 deletions

diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
index d3553349fc..debe52e7f3 100644
--- a/target/linux/ramips/dts/MT7620a.dts
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -6,122 +6,120 @@
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 	model = "Ralink MT7620a + MT7610e evaluation board";
 
-	palmbus@10000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "en25q64";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x7b0000>;
-				};
-			};
+	gpio-keys-polled {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		s2 {
+			label = "S2";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
 		};
-	};
 
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uartf";
-				ralink,function = "gpio";
-			};
+		s3 {
+			label = "S3";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x101>;
 		};
 	};
+};
 
-	ethernet@10100000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-		mediatek,portmap = "llllw";
+&spi0 {
+	status = "okay";
 
-		port@4 {
-			status = "okay";
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0 0>;
+		linux,modalias = "m25p80", "en25q64";
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
 		};
 
-		port@5 {
-			status = "okay";
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
 		};
 
-		mdio-bus {
-			status = "okay";
-
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-				phy-mode = "rgmii";
-			};
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
 
-			phy5: ethernet-phy@5 {
-				reg = <5>;
-				phy-mode = "rgmii";
-			};
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
 		};
 	};
+};
 
-	gsw@10110000 {
-		mediatek,port4 = "gmac";
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartf";
+			ralink,function = "gpio";
+		};
 	};
+};
+
+&ethernet {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+	mediatek,portmap = "llllw";
 
-	sdhci@10130000 {
+	port@4 {
 		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy4>;
 	};
 
-	pcie@10140000 {
+	port@5 {
 		status = "okay";
+		phy-mode = "rgmii";
+		phy-handle = <&phy5>;
 	};
 
-	gpio-keys-polled {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
+	mdio-bus {
+		status = "okay";
 
-		s2 {
-			label = "S2";
-			gpios = <&gpio0 1 1>;
-			linux,code = <0x100>;
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+			phy-mode = "rgmii";
 		};
 
-		s3 {
-			label = "S3";
-			gpios = <&gpio0 2 1>;
-			linux,code = <0x101>;
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii";
 		};
 	};
+};
 
-	ehci@101c0000 {
-		status = "okay";
-	};
+&gsw {
+	mediatek,port4 = "gmac";
+};
 
-	ohci@101c1000 {
-		status = "okay";
-	};
+&sdhci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
 };