ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 36 insertions, 32 deletions

diff --git a/target/linux/ramips/dts/MAC1200RV2.dts b/target/linux/ramips/dts/MAC1200RV2.dts
index f9e9a204a0..3e2b602689 100644
--- a/target/linux/ramips/dts/MAC1200RV2.dts
+++ b/target/linux/ramips/dts/MAC1200RV2.dts
@@ -35,43 +35,47 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0 0>;
 		spi-max-frequency = <10000000>;
 		m25p,chunked-io = <32>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x1d800>;
-		};
-
-		factory: partition@1d800 {
-			label = "factory_info";
-			reg = <0x1d800 0x800>;
-			read-only;
-		};
-
-		art: partition@1e000 {
-			label = "art";
-			reg = <0x1e000 0x2000>;
-			read-only;
-		};
-
-		partition@20000 {
-			label = "config";
-			reg = <0x20000 0x10000>;
-		};
-
-		partition@30000 {
-			label = "u-boot2";
-			reg = <0x30000 0x10000>;
-		};
-
-		partition@40000 {
-			label = "firmware";
-			reg = <0x40000 0x7c0000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1d800>;
+			};
+
+			factory: partition@1d800 {
+				label = "factory_info";
+				reg = <0x1d800 0x800>;
+				read-only;
+			};
+
+			art: partition@1e000 {
+				label = "art";
+				reg = <0x1e000 0x2000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "config";
+				reg = <0x20000 0x10000>;
+			};
+
+			partition@30000 {
+				label = "u-boot2";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "firmware";
+				reg = <0x40000 0x7c0000>;
+			};
 		};
 	};
 };