ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 144 deletions

diff --git a/target/linux/ramips/dts/K2G.dts b/target/linux/ramips/dts/K2G.dts
deleted file mode 100644
index 4ca5229745..0000000000
--- a/target/linux/ramips/dts/K2G.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "phicomm,k2g", "ralink,mt7620a-soc";
-	model = "Phicomm K2G";
-
-	aliases {
-		led-boot = &led_blue;
-		led-failsafe = &led_blue;
-		led-running = &led_blue;
-		led-upgrade = &led_blue;
-		serial0 = &uartlite;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_blue: blue {
-			label = "k2g:blue:status";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-
-		yellow {
-			label = "k2g:yellow:status";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		red {
-			label = "k2g:red:status";
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x30000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x30000 0x10000>;
-				label = "u-boot-env";
-				read-only;
-			};
-
-			factory: partition@40000 {
-				reg = <0x40000 0x10000>;
-				label = "factory";
-				read-only;
-			};
-
-			partition@50000 {
-				reg = <0x50000 0x50000>;
-				label = "permanent_config";
-				read-only;
-			};
-
-			partition@a0000 {
-				compatible = "denx,uimage";
-				reg = <0xa0000 0x760000>;
-				label = "firmware";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "uartf";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii2_pins &mdio_pins>;
-	mtd-mac-address = <&factory 0x28>;
-	mediatek,portmap = "llllw";
-
-	port@5 {
-		status = "okay";
-		phy-handle = <&phy5>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	mt76@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pa_pins>;
-};