ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 188 deletions

diff --git a/target/linux/ramips/dts/HDRM200.dts b/target/linux/ramips/dts/HDRM200.dts
deleted file mode 100644
index ad16d02716..0000000000
--- a/target/linux/ramips/dts/HDRM200.dts
+++ /dev/null
@@ -1,188 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc";
-	model = "Head Weblink HDRM200";
-
-	aliases {
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		bootargs = "console=ttyS1,57600";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		rssi {
-			label = "hdrm200:red:rssi";
-			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-		};
-
-		led_system: system {
-			label = "hdrm200:green:system";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		air {
-			label = "hdrm200:green:wifi";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			firmware: partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xfb0000>;
-			};
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&ethernet {
-	status = "okay";
-
-	mtd-mac-address = <&factory 0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
-	port@4 {
-		status = "okay";
-		phy-handle = <&phy4>;
-		phy-mode = "rgmii";
-	};
-
-	port@5 {
-		status = "okay";
-		phy-handle = <&phy5>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii";
-		};
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "i2c", "uartf", "pa", "spi refclk",
-				       "wled";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi@0,0 {
-		compatible = "mediatek,mt76";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
-&uart {
-    status = "okay";
-};