ramips: move partitions into partition table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>

1 files changed, 40 insertions, 36 deletions

diff --git a/target/linux/ramips/dts/HC5X61.dtsi b/target/linux/ramips/dts/HC5X61.dtsi
index a9c5c3f483..096a82513e 100644
--- a/target/linux/ramips/dts/HC5X61.dtsi
+++ b/target/linux/ramips/dts/HC5X61.dtsi
@@ -55,46 +55,50 @@
 	status = "okay";
 
 	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
 
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x30000>;
-		};
-
-		partition@30000 {
-			label = "u-boot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-
-		factory: partition@40000 {
-			label = "factory";
-			reg = <0x40000 0x10000>;
-		};
-
-		partition@50000 {
-			label = "firmware";
-			reg = <0x50000 0xf80000>;
-		};
-
-		partition@fd0000 {
-			label = "hwf_config";
-			reg = <0xfd0000 0x10000>;
-		};
-
-		bdinfo: partition@fe0000 {
-			label = "bdinfo";
-			reg = <0xfe0000 0x10000>;
-		};
-
-		partition@ff0000 {
-			label = "backup";
-			reg = <0xff0000 0x10000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0xf80000>;
+			};
+
+			partition@fd0000 {
+				label = "hwf_config";
+				reg = <0xfd0000 0x10000>;
+			};
+
+			bdinfo: partition@fe0000 {
+				label = "bdinfo";
+				reg = <0xfe0000 0x10000>;
+			};
+
+			partition@ff0000 {
+				label = "backup";
+				reg = <0xff0000 0x10000>;
+			};
 		};
 	};
 };