ramips: Add DTS files for HiWiFi HC5x61 models

HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.

The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval.

v3 fix
  1: Merged most stuff into dtsi file
  2: Remove unnecessary empty lines.

Signed-off-by: Xiaoning Kang <kangxn@163.com>

SVN-Revision: 47112

1 files changed, 92 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/HC5861.dts b/target/linux/ramips/dts/HC5861.dts
new file mode 100644
index 0000000000..05857ea8e8
--- /dev/null
+++ b/target/linux/ramips/dts/HC5861.dts
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+/include/ "HC5XXX.dtsi"
+
+/ {
+	compatible = "HC5861", "ralink,mt7620a-soc";
+	model = "HiWiFi HC5861";
+
+	ethernet@10100000 {
+		status = "okay";
+		mtd-mac-address = <&factory 0x4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+		ralink,port-map = "wllll";
+
+		port@4 {
+			status = "okay";
+			phy-handle = <&phy4>;
+			phy-mode = "rgmii";
+		};
+
+		port@5 {
+			status = "okay";
+			phy-handle = <&phy5>;
+			phy-mode = "rgmii";
+		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				phy-mode = "rgmii";
+			};
+
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				phy-mode = "rgmii";
+			};
+		};
+	};
+
+	gsw@10110000 {
+		ralink,port4 = "gmac";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "hc5861:blue:system";
+			gpios = <&gpio0 9 1>;
+		};
+
+		wlan2g {
+			label = "hc5861:blue:wlan2g";
+			gpios = <&gpio0 11 1>;
+		};
+
+		internet {
+			label = "hc5861:blue:internet";
+			gpios = <&gpio3 0 1>;
+		};
+
+		wlan5g {
+			label = "hc5861:blue:wlan5g";
+			gpios = <&gpio0 7 1>;
+		};
+
+		turbo {
+			label = "hc5861:blue:turbo";
+			gpios = <&gpio0 10 1>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usbpower {
+			gpio-export,name = "usbpower";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 13 0>;
+		};
+
+		sdpower {
+			gpio-export,name = "sdpower";
+			gpio-export,output = <0>;
+			gpios = <&gpio0 8 0>;
+		};
+	};
+};