aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/GB-PC2.dts
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2018-02-17 09:54:57 +0100
committerMathias Kresin <dev@kresin.me>2018-02-20 19:25:17 +0100
commitcb741654e5b9b659ffc7cb5c1e1fa362aa8c4652 (patch)
treecb7cb37100af81b774ca6f93222e2265b30b046a /target/linux/ramips/dts/GB-PC2.dts
parentc330408ea92d9bf6af187b90d2f3f513d4d8ed8a (diff)
downloadupstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.gz
upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.bz2
upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.zip
ramips: improve GnuBee Personal Cloud Two support
Use the generic board detection for the GnuBee Personal Cloud Two instead of the target specific one as all recent additions are doing. Fixup the pinmux to set all pins used as GPIO to the function GPIO. Request pins where used. Drop the i2c from the dts. There is nothing connected. While at it fix an indentation issue and use references instead of duplicating the whole node path. Use the same switch config as for the GB-PC1 and drop the led trigger for the not supported IP1001 phy connected to second rgmii. Fixes: c60a21532bc9 ("ramips: Add support for the GnuBee Personal Cloud Two") Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/dts/GB-PC2.dts')
-rw-r--r--target/linux/ramips/dts/GB-PC2.dts31
1 files changed, 14 insertions, 17 deletions
diff --git a/target/linux/ramips/dts/GB-PC2.dts b/target/linux/ramips/dts/GB-PC2.dts
index f31ac2b843..ccaf54f3c8 100644
--- a/target/linux/ramips/dts/GB-PC2.dts
+++ b/target/linux/ramips/dts/GB-PC2.dts
@@ -18,12 +18,6 @@
bootargs = "console=ttyS0,57600";
};
- palmbus: palmbus@1E000000 {
- i2c@900 {
- status = "okay";
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -50,23 +44,23 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- lan {
- label = "gb-pc2:green:lan";
+ lan1 {
+ label = "gb-pc2:green:lan1";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- wan {
- label = "gb-pc2:green:wan";
+ lan2 {
+ label = "gb-pc2:green:lan2";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
- eth1-y {
- label = "gb-pc2:yellow:eth1-y";
+ lan3-yellow {
+ label = "gb-pc2:yellow:lan3";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
- eth1-g {
- label = "gb-pc2:green:eth1-g";
+ lan3-green {
+ label = "gb-pc2:green:lan3";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
@@ -75,6 +69,9 @@
&sdhci {
status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
@@ -114,8 +111,8 @@
};
&cpuclock {
- compatible = "fixed-clock";
- clock-frequency = <900000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <900000000>;
};
&pcie {
@@ -129,7 +126,7 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "uart3";
+ ralink,group = "jtag", "rgmii3", "uart3", "wdt";
ralink,function = "gpio";
};
};