aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/F9K1109V1.dts
diff options
context:
space:
mode:
authorKip Porterfield <kip.porterfield@gmail.com>2019-02-03 13:54:18 -0500
committerChristian Lamparter <chunkeey@gmail.com>2019-03-02 13:04:45 +0100
commitf2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3 (patch)
treecc3f4fc38a629e19a0939adde82b30c6cdf9d849 /target/linux/ramips/dts/F9K1109V1.dts
parent6c558bae648ea8bca8fc8fcbee760a0cdc9ca9c9 (diff)
downloadupstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.gz
upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.tar.bz2
upstream-f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3.zip
ramips: add support for Belkin F9K1109v1
Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]
Diffstat (limited to 'target/linux/ramips/dts/F9K1109V1.dts')
-rw-r--r--target/linux/ramips/dts/F9K1109V1.dts71
1 files changed, 71 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/F9K1109V1.dts b/target/linux/ramips/dts/F9K1109V1.dts
new file mode 100644
index 0000000000..cdd2b6b714
--- /dev/null
+++ b/target/linux/ramips/dts/F9K1109V1.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "F9K110x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "belkin,f9k1109v1", "ralink,rt3883-soc";
+ model = "Belkin F9K1109 Version 1.0";
+
+ aliases {
+ led-boot = &led_status_amber;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_amber: internet_amber {
+ label = "f9k1109v1:amber:internet";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: internet_blue {
+ label = "f9k1109v1:blue:internet";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ usb1 {
+ label = "f9k1109v1:green:usb1";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "f9k1109v1:green:usb2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_amber {
+ label = "f9k1109v1:amber:wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_blue {
+ label = "f9k1109v1:blue:wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};