ramips/mt7621: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 248 deletions

diff --git a/target/linux/ramips/dts/EX6150.dts b/target/linux/ramips/dts/EX6150.dts
deleted file mode 100644
index a5827f270d..0000000000
--- a/target/linux/ramips/dts/EX6150.dts
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "netgear,ex6150", "mediatek,mt7621-soc";
-	model = "Netgear EX6150";
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_amber;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_amber: power_amber {
-			label = "ex6150:amber:power";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "ex6150:green:power";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "ex6150:green:wps";
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-
-		rightarrow {
-			label = "ex6150:blue:rightarrow";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-
-		leftarrow {
-			label = "ex6150:blue:leftarrow";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-		};
-
-		router_green {
-			label = "ex6150:green:router";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		router_red {
-			label = "ex6150:red:router";
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-		};
-
-		client_green {
-			label = "ex6150:green:client";
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		client_red {
-			label = "ex6150:red:client";
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		toggle {
-			label = "AP/Extender toggle";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-			/* Active when switch is set to "Access Point" */
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "config";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x50000 0xe80000>;
-			};
-
-			partition@ed0000 {
-				label = "ML1";
-				reg = <0xed0000 0x10000>;
-				read-only;
-			};
-
-			partition@ef0000 {
-				label = "ML2";
-				reg = <0xef0000 0x20000>;
-				read-only;
-			};
-
-			partition@f10000 {
-				label = "ML3";
-				reg = <0xf10000 0x20000>;
-				read-only;
-			};
-
-			partition@f30000 {
-				label = "ML4";
-				reg = <0xf30000 0x20000>;
-				read-only;
-			};
-
-			partition@f50000 {
-				label = "ML5";
-				reg = <0xf50000 0x20000>;
-				read-only;
-			};
-
-			partition@f70000 {
-				label = "ML6";
-				reg = <0xf70000 0x20000>;
-				read-only;
-			};
-
-			partition@f90000 {
-				label = "ML7";
-				reg = <0xf90000 0x20000>;
-				read-only;
-			};
-
-			partition@fb0000 {
-				label = "T_Meter1";
-				reg = <0xfb0000 0x10000>;
-				read-only;
-			};
-
-			partition@fc0000 {
-				label = "T_Meter2";
-				reg = <0xfc0000 0x10000>;
-				read-only;
-			};
-
-			partition@fd0000 {
-				label = "POT";
-				reg = <0xfd0000 0x10000>;
-				read-only;
-			};
-
-			partition@fe0000 {
-				label = "board_data";
-				reg = <0xfe0000 0x10000>;
-				read-only;
-			};
-
-			partition@ff0000 {
-				label = "nvram";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
-&pcie1 {
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x0000>;
-		ieee80211-freq-limit = <2400000 2500000>;
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x00000004>;
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "sdhci", "rgmii2", "jtag";
-			ralink,function = "gpio";
-		};
-	};
-};