ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 152 deletions

diff --git a/target/linux/ramips/dts/DWR-921-C1.dts b/target/linux/ramips/dts/DWR-921-C1.dts
deleted file mode 100644
index 92bcd54a42..0000000000
--- a/target/linux/ramips/dts/DWR-921-C1.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc";
-	model = "D-Link DWR-921 C1";
-
-	aliases {
-		led-boot = &led_sstrenghg;
-		led-failsafe = &led_sstrenghg;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sms {
-			label = "dwr-921-c1:green:sms";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "dwr-921-c1:green:lan";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_sstrenghg: sstrengthg {
-			label = "dwr-921-c1:green:sigstrength";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-
-		sstrengthr {
-			label = "dwr-921-c1:red:sigstrength";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		4g {
-			label = "dwr-921-c1:green:4g";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		};
-
-		3g {
-			label = "dwr-921-c1:green:3g";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi {
-			label = "dwr-921-c1:green:wifi";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		lte_modem_enable {
-			gpio-export,name = "lte_modem_enable";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "jboot";
-				reg = <0x0 0x10000>;
-				read-only;
-			};
-
-			partition@10000 {
-				compatible = "amit,jimage";
-				label = "firmware";
-				reg = <0x10000 0xfe0000>;
-			};
-
-			config: partition@ff0000 {
-				label = "config";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&ethernet {
-	port@4 {
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "spi refclk", "i2c", "ephy", "wled";
-			ralink,function = "gpio";
-		};
-	};
-};