ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 194 deletions

diff --git a/target/linux/ramips/dts/DWR-118-A1.dts b/target/linux/ramips/dts/DWR-118-A1.dts
deleted file mode 100644
index 707bc1c3d3..0000000000
--- a/target/linux/ramips/dts/DWR-118-A1.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
-	model = "D-Link DWR-118 A1";
-
-	aliases {
-		led-boot = &led_internet;
-		led-failsafe = &led_internet;
-		led-upgrade = &led_internet;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wan {
-			label = "dwr-118-a1:green:wan";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led_internet: internet {
-			label = "dwr-118-a1:green:internet";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "dwr-118-a1:green:lan";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "dwr-118-a1:green:wlan2g";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "dwr-118-a1:green:usb";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb {
-			gpio-export,name = "usb";
-			gpio-export,output = <0>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <80000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "jboot";
-				reg = <0x0 0x10000>;
-				read-only;
-			};
-
-			partition@10000 {
-				compatible = "amit,jimage";
-				label = "firmware";
-				reg = <0x10000 0xfe0000>;
-			};
-
-			config: partition@ff0000 {
-				label = "config";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "ephy", "uartf", "spi refclk", "wled";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mtd-mac-address = <&config 0xe496>;
-		mtd-mac-address-increment = <(2)>;
-		mediatek,mtd-eeprom = <&config 0xe083>;
-
-		led {
-			led-sources = <0>;
-			led-active-low;
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
-	port@4 {
-		status = "okay";
-		phy-handle = <&phy4>;
-		phy-mode = "rgmii";
-	};
-
-	port@5 {
-		status = "okay";
-		phy-handle = <&phy5>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii-rxid";
-		};
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii-rxid";
-		};
-	};
-};
-
-&gsw {
-	mediatek,port4 = "gmac";
-};