aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/DWR-118-A1.dts
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2018-10-24 14:06:35 +0200
committerMathias Kresin <dev@kresin.me>2018-12-03 15:34:56 +0100
commite9a9b7d1ed76c88e097d5bc4dabf38735312558b (patch)
tree844dec550a138ed326345a8b3f1fdb8ade2ef6a6 /target/linux/ramips/dts/DWR-118-A1.dts
parent40692f0fb55ca5bd2426701b3a9e64e3b7487a7d (diff)
downloadupstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.tar.gz
upstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.tar.bz2
upstream-e9a9b7d1ed76c88e097d5bc4dabf38735312558b.zip
ramips: add support for D-Link DWR-118-A1
The DWR-118-A1 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 3x 10/100 Mbps Ethernet (3 LAN) - 2x 10/100/1000 Mbps ICPlus IP1001 Ethernet PHY (1 WAN AND 1 LAN) - 1x internal, non-detachable antenna - 2x external, non-detachable antennas - 1x USB 2.0 - UART (J1) header on PCB (57600 8n1) - 7x LED (5x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - WIFI 5G LED not working - flash is very slow The status led has been assigned to the dwr-118-a1:green:internet led. At the end of the boot it is switched off and is available for other operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts/DWR-118-A1.dts')
-rw-r--r--target/linux/ramips/dts/DWR-118-A1.dts189
1 files changed, 189 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/DWR-118-A1.dts b/target/linux/ramips/dts/DWR-118-A1.dts
new file mode 100644
index 0000000000..ab88553a05
--- /dev/null
+++ b/target/linux/ramips/dts/DWR-118-A1.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc";
+ model = "D-Link DWR-118 A1";
+
+ aliases {
+ led-boot = &led_internet;
+ led-failsafe = &led_internet;
+ led-upgrade = &led_internet;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "dwr-118-a1:green:wan";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_internet: internet {
+ label = "dwr-118-a1:green:internet";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "dwr-118-a1:green:lan";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "dwr-118-a1:green:wlan2g";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "dwr-118-a1:green:usb";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0xfe0000>;
+ };
+
+ config: partition@ff0000 {
+ label = "config";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mtd-mac-address = <&config 0xe496>;
+ mtd-mac-address-increment = <(2)>;
+ mediatek,mtd-eeprom = <&config 0xe083>;
+ };
+};
+
+&ethernet {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ port@4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port@5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii-rxid";
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
+};
+
+&gsw {
+ mediatek,port4 = "gmac";
+};