ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1

This changes device name from "TP-Link Archer C20" to "TP-Link Archer C20 v1"
because of TPLINK released new TP-Link Archer C20 v4. Additionally
migration to the generic board detection has been made.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>

1 files changed, 0 insertions, 187 deletions

diff --git a/target/linux/ramips/dts/ArcherC20.dts b/target/linux/ramips/dts/ArcherC20.dts
deleted file mode 100644
index f0281c37c3..0000000000
--- a/target/linux/ramips/dts/ArcherC20.dts
+++ /dev/null
@@ -1,187 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "tplink,c20", "ralink,mt7620a-soc";
-	model = "TP-Link Archer C20";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		lan {
-			label = "c20:blue:lan";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "c20:blue:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		usb {
-			label = "c20:blue:usb";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "c20:blue:wan";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan_orange {
-			label = "c20:orange:wan";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "c20:blue:wlan5g";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "c20:blue:wlan2g";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "c20:blue:wps";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};	};
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x20000>;
-			read-only;
-		};
-
-		partition@20000 {
-			label = "firmware";
-			reg = <0x20000 0x7a0000>;
-		};
-
-		partition@7c0000 {
-			label = "config";
-			reg = <0x7c0000 0x10000>;
-			read-only;
-		};
-
-		rom: partition@7d0000 {
-			label = "rom";
-			reg = <0x7d0000 0x10000>;
-			read-only;
-		};
-
-		partition@7e0000 {
-			label = "romfile";
-			reg = <0x7e0000 0x10000>;
-			read-only;
-		};
-
-		radio: partition@7f0000 {
-			label = "radio";
-			reg = <0x7f0000 0x10000>;
-			read-only;
-		};
-	};
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-		pinctrl-names = "default";
-		mtd-mac-address = <&rom 0xf100>;
-		mediatek,portmap = "wllll";
-	};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&gsw {
-	mediatek,port4 = "ephy";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&radio 0>;
-	mtd-mac-address = <&rom 0xf100>;
-	mtd-mac-address-increment = <(-2)>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
-	status = "okay";
-
-	pcie-bridge {
-		mt76@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
-			mediatek,mtd-eeprom = <&radio 32768>;
-			ieee80211-freq-limit = <5000000 6000000>;
-			mtd-mac-address = <&rom 0xf100>;
-			mtd-mac-address-increment = <(-1)>;
-		};
-	};
-};