ramips/mt7620: Name DTS files based on scheme

As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 191 deletions

diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts
deleted file mode 100644
index e20b873569..0000000000
--- a/target/linux/ramips/dts/ArcherC2-v1.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
-	model = "TP-Link Archer C2 v1";
-
-	aliases {
-		led-boot = &led_wps;
-		led-failsafe = &led_wps;
-		led-running = &led_wps;
-		led-upgrade = &led_wps;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		lan {
-			label = "c2-v1:green:lan";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "c2-v1:green:usb";
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		led_wps: wps {
-			label = "c2-v1:green:wps";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "c2-v1:green:wan";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "c2-v1:green:wlan";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset_wps {
-			label = "reset_wps";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	rtl8367rb {
-		compatible = "realtek,rtl8367b", "rtl8367b";
-		cpu_port = <6>;
-		realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
-		mii-bus = <&mdio0>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x20000>;
-				read-only;
-			};
-
-			partition@20000 {
-				compatible = "tplink,firmware";
-				label = "firmware";
-				reg = <0x20000 0x7a0000>;
-			};
-
-			partition@7c0000 {
-				label = "config";
-				reg = <0x7c0000 0x10000>;
-				read-only;
-			};
-
-			rom: partition@7d0000 {
-				label = "rom";
-				reg = <0x7d0000 0x10000>;
-				read-only;
-			};
-
-			partition@7e0000 {
-				label = "romfile";
-				reg = <0x7e0000 0x10000>;
-				read-only;
-			};
-
-			radio: partition@7f0000 {
-				label = "radio";
-				reg = <0x7f0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&rom 0xf100>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
-	port@5 {
-		status = "okay";
-		mediatek,fixed-link = <1000 1 1 1>;
-		phy-mode = "rgmii";
-	};
-
-	mdio0: mdio-bus {
-		status = "okay";
-	};
-};
-
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&radio 0>;
-	mtd-mac-address = <&rom 0xf100>;
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	mt76@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&radio 0x8000>;
-	};
-};