diff options
| author | Mathias Kresin <dev@kresin.me> | 2018-02-17 09:54:57 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-02-20 19:25:17 +0100 |
| commit | cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652 (patch) | |
| tree | cb7cb37100af81b774ca6f93222e2265b30b046a /target/linux/ramips/base-files | |
| parent | c330408ea92d9bf6af187b90d2f3f513d4d8ed8a (diff) | |
| download | upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.gz upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.tar.bz2 upstream-cb741654e5b9b659ffc7cb5c1e1fa362aa8c4652.zip | |
ramips: improve GnuBee Personal Cloud Two support
Use the generic board detection for the GnuBee Personal Cloud Two
instead of the target specific one as all recent additions are doing.
Fixup the pinmux to set all pins used as GPIO to the function GPIO.
Request pins where used.
Drop the i2c from the dts. There is nothing connected. While at it fix an
indentation issue and use references instead of duplicating the whole
node path.
Use the same switch config as for the GB-PC1 and drop the led trigger for
the not supported IP1001 phy connected to second rgmii.
Fixes: c60a21532bc9 ("ramips: Add support for the GnuBee Personal Cloud Two")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files')
5 files changed, 6 insertions, 17 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 573dd31c64..16d38dd5fe 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -187,16 +187,11 @@ fonera20n) set_usb_led "$boardname:orange:usb" set_wifi_led "$boardname:orange:wifi" ;; -gb-pc1) +gb-pc1|\ +gnubee,gb-pc2) ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01" ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10" ;; -gb-pc2) - ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x01" - ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x10" - ucidef_set_led_netdev "eth1-g" "eth1-g" "$board:green:eth1-g" "eth1" - ucidef_set_led_netdev "eth1-y" "eth1-y" "$board:green:eth1-y" "eth1" - ;; gl-mt300a|\ gl-mt300n|\ gl-mt750) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 4208321e69..946810b3e2 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -202,14 +202,11 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; - gb-pc1) + gb-pc1|\ + gnubee,gb-pc2) ucidef_add_switch "switch0" \ "0:lan" "4:lan" "6@eth0" ;; - gb-pc2) - ucidef_add_switch "switch0" \ - "4:lan" "0:wan" "6@eth0" - ;; gl-mt300n-v2) ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 04a398c826..c5f62ab66d 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -91,7 +91,7 @@ get_status_led() { dir-620-d1|\ dwr-512-b|\ gb-pc1|\ - gb-pc2|\ + gnubee,gb-pc2|\ hpm|\ hw550-3g|\ mac1200rv2|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 74ed5913b8..75474fbc6d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -205,9 +205,6 @@ ramips_board_detect() { *"GB-PC1") name="gb-pc1" ;; - *"GB-PC2") - name="gb-pc2" - ;; *"GL-MT300A") name="gl-mt300a" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index fd0198263e..23d31e9463 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -61,7 +61,7 @@ platform_check_image() { fonera20n|\ freestation5|\ gb-pc1|\ - gb-pc2|\ + gnubee,gb-pc2|\ gl-mt300a|\ gl-mt300n|\ gl-mt750|\ |