diff options
| author | NOGUCHI Hiroshi <drvlabo@gmail.com> | 2019-07-26 08:11:48 +0900 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-07-26 08:09:16 +0200 |
| commit | a1c6a316d2997b6bbee520fb1bf21f3b994f9e52 (patch) | |
| tree | 0b883afb24d53a30bd2416ebc6e1b0c1f531b8f3 /target/linux/ramips/base-files | |
| parent | 5cf897779eacf63cdbcdebd1af68c109096665c6 (diff) | |
| download | upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.tar.gz upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.tar.bz2 upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.zip | |
ramips: add support for Fon FON2601
FON2601 is a wireless router.
Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
for 11b/g/n (upto 300 Mbps): MT7620A built-in WMAC
for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)
Installation (only available via UART):
1. download sysupgrade binary image by wget command
2. write sysupgrade binary image to Flash
command is:
mtd write sysupgrade.bin firmware
3. reboot
Important Notice:
Only one button is displayed as "WPS" on enclosure.
However, it is configured as "reset" (factory resetting feature).
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 95bd2a44f1..2f9a02256e 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -329,6 +329,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch1" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; + fon,fon2601) + ucidef_add_switch "switch0" \ + "0:lan" "4:wan" "6@eth0" + ;; gehua,ghl-r-001) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" |