diff options
| author | Edmunt Pienkowsky <roed@onet.eu> | 2017-10-21 11:07:43 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-10-27 11:19:38 +0200 |
| commit | 9786b53efb8225f5b6f21921e684b40b9febe61e (patch) | |
| tree | 5e4a463bb325a1e96e5eee240ef7df865b87cd02 /target/linux/ramips/base-files | |
| parent | 4425fa84dad57b6b0046b97e224d50b33f1f536b (diff) | |
| download | upstream-9786b53efb8225f5b6f21921e684b40b9febe61e.tar.gz upstream-9786b53efb8225f5b6f21921e684b40b9febe61e.tar.bz2 upstream-9786b53efb8225f5b6f21921e684b40b9febe61e.zip | |
ramips: fix Youku-YK1 support
Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.
Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.
Add the missing kernel packages for USB and microSD card reader to the
default package selection.
Fix the maximum image size value. The board has a 32MByte flash chip.
Fixes: FS#1055
Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 2 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 |
2 files changed, 3 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 75ab0da741..037331df96 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -461,9 +461,9 @@ zte-q7) set_wifi_led "$board:blue:status" ;; youku-yk1) - ucidef_set_led_default "power" "power" "$board:blue:power" "1" set_wifi_led "$board:blue:air" set_usb_led "$board:blue:usb" + ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10" ;; esac diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 4411babbf9..3b3c455ba5 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -134,7 +134,8 @@ get_status_led() { wl-330n3g|\ wli-tx4-ag300n|\ y1|\ - y1s) + y1s|\ + youku-yk1) status_led="$board:blue:power" ;; db-wrt01|\ |