diff options
| author | Birger Koblitz <mail@birger-koblitz.de> | 2019-09-19 21:33:59 +0200 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-09-20 11:36:27 +0200 |
| commit | f285e8634c57d28aa970b80c5c59e85485f35c7d (patch) | |
| tree | 6f484b810e10084a6a1fff8c3a2ce6fff772c722 /target/linux/ramips/base-files | |
| parent | 2e2fe82d1e74794a2fe78861ed43627798d5ae4b (diff) | |
| download | upstream-f285e8634c57d28aa970b80c5c59e85485f35c7d.tar.gz upstream-f285e8634c57d28aa970b80c5c59e85485f35c7d.tar.bz2 upstream-f285e8634c57d28aa970b80c5c59e85485f35c7d.zip | |
ramips: add support for Edimax RG21S
SoC: MediaTek MT7621AT dual-core @ 880MHz
RAM: 256M (Nanya NT5CC128M)
FLASH: 16MB (Macronix MX25L12835F)
WiFi: - 2.4GHz MediaTek MT7615N bgn
- 5GHz MediaTek MT7615N nac
Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
USB: No
BTN: Reset, WPS
LED: 4 red LEDs, indistinguishable when casing closed
UART: UART is present as Pads marked J1 on the PCB.
3.3V - RX - GND - TX / 57600-8N1
3.3V is the square pad
Installation
------------
Update the factory image via the OEM web-interface
(by default:http://192.168.1.1)
The sysupgrade image can be installed via TFTP from
the U-Boot bootloader. Connect ethernet port 2.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
[flash node rename, EDIMAX -> Edimax, complete device model name]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2aab2edfea..5668c1816d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -333,6 +333,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "4:wan" "6@eth0" ;; + edimax,rg21s) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; gehua,ghl-r-001) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" @@ -624,6 +628,10 @@ ramips_setup_macs() netgear,r6850) wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; + edimax,rg21s) + lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + ;; hiwifi,hc5661|\ hiwifi,hc5661a|\ hiwifi,hc5761|\ |