diff options
| author | Jackson Ming Hu <huming2207@gmail.com> | 2017-12-15 11:51:33 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-12-21 01:05:16 +0100 |
| commit | c0e131b4363dde16a1071131b7e762e36099f780 (patch) | |
| tree | 180ee78c232b121b8d461ed6f131f71d6d83b19e /target/linux/ramips/base-files | |
| parent | fe6f298b07941758a759354c6751188c825c5ffb (diff) | |
| download | upstream-c0e131b4363dde16a1071131b7e762e36099f780.tar.gz upstream-c0e131b4363dde16a1071131b7e762e36099f780.tar.bz2 upstream-c0e131b4363dde16a1071131b7e762e36099f780.zip | |
ramips: add support for newifi d2
Previously Newifi D2 could only use PandoraBox M1's firmware.
It works fine, but LED GPIO is different.
As a result, a separated DTS file for this device should be implemented.
Hardware spec:
* CPU: MTK MT7621A
* RAM: 512MB
* ROM: 32MB SPI Flash
* WiFi: MTK MT7603+MT7612
* Button: 2 buttons (reset, wps)
* LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) &
2 dual-color LEDs (Power, Internet)
* Ethernet: 5 ports, 4 LAN + 1 WAN
Installation method:
Same as Newifi D1, users may need to request unlock code from the device
manufacturer. Otherwise, a SPI flash programmer may be necessary to get
the firmware flashed. After the device is unlocked, press and hold reset
button before power cable plugs in. Then go to http://192.168.1.1 to
upload and flash the firmware package.
Signed-off-by: Jackson Ming Hu <huming2207@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files')
4 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 671a578f80..a5c51c7c88 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -305,6 +305,12 @@ pbr-m1) ucidef_set_led_default "power" "power" "$boardname:blue:power" "1" ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1" ;; +d-team,newifi-d2) + set_usb_led "$boardname:blue:usb" + ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10" + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1" + ;; psg1208) set_wifi_led "$boardname:white:wlan2g" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 947b0dd8ae..5a64bb727a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -92,6 +92,7 @@ ramips_setup_interfaces() mt7628|\ mzk-750dhp|\ mzk-w300nh2|\ + d-team,newifi-d2|\ nixcore-x1-8M|\ nixcore-x1-16M|\ oy-0001|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 1d4b0eff3f..e7b49a5039 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -125,6 +125,7 @@ get_status_led() { d240|\ dap-1350|\ na930|\ + d-team,newifi-d2|\ pbr-m1|\ re350-v1|\ rt-ac51u|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index d95dcfe17a..68b47eeba0 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -107,6 +107,7 @@ platform_check_image() { nbg-419n|\ nbg-419n2|\ newifi-d1|\ + d-team,newifi-d2|\ nixcore-x1-8M|\ nixcore-x1-16M|\ nw718|\ |