aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-01-02 03:11:39 +0100
committerDavid Bauer <mail@david-bauer.net>2020-01-03 17:52:35 +0100
commit80e0b97d079289787793ecdee4cfcd2e3a674f70 (patch)
tree189227a4b67b387816e104fb9ba25b7a9a98ecf2 /target/linux/ramips/base-files
parenta2e2c40b5ebdc7170a41c5f77b27fd1052eede02 (diff)
downloadupstream-80e0b97d079289787793ecdee4cfcd2e3a674f70.tar.gz
upstream-80e0b97d079289787793ecdee4cfcd2e3a674f70.tar.bz2
upstream-80e0b97d079289787793ecdee4cfcd2e3a674f70.zip
ramips: convert TP-Link MT7620 boards to tpt trigger
This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1e7c6381f0058e49caab8de54eaad4862732f95d)
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
1 files changed, 0 insertions, 5 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 38125375f4..fa7daf0ff2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -83,13 +83,10 @@ c108)
c20i)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
;;
c50)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
- set_wifi_led "$boardname:green:wlan5g"
;;
cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
@@ -324,12 +321,10 @@ tl-wr841n-v13)
tplink,c2-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
- set_wifi_led "$boardname:green:wlan"
;;
tplink,c20-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
tplink,c20-v4)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"