aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorAndrew Yong <me@ndoo.sg>2017-01-08 14:30:10 +0800
committerMathias Kresin <dev@kresin.me>2017-01-13 08:32:35 +0100
commit3f31029b190417e12f4d19d9999cd52ec76d0f85 (patch)
tree93a92ab8ccc6b8e55af209e4c86788f47046e7bf /target/linux/ramips/base-files
parentd7fd1a0f8da37a978b138b2966c12d06bda55df5 (diff)
downloadupstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.gz
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.bz2
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.zip
ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary "ultimate" dock. Specifications: - SoC: MediaTek MT7628AN (580MHz, ramips) - RAM: 128MB DDR2 166MHz - Storage: 16MB NOR SPI flash onboard + microSD slot on dock - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2 boards with onboard 1x chip antenna - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header - Dock hardware: - USB 2.0 socket - MicroSD socket - 100Mbps Ethernet x1 - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S DAC/ADC (support WIP) - Micro USB for power and console (UART2) Initial installation: - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on SSID "VoCore2" - Connect to VoCore2 by Ethernet or Wi-Fi - `ssh root@192.168.1.1` (password is "vocore") - scp/wget/etc. LEDE sysupgrade.bin to VoCore2 - `sysupgrade -n <your image>.bin` (don't keep old config, as the original firmware uses Ralink SDK Wi-Fi drivers and not mt76+mac80211) - after sysupgrade completes, Wi-Fi will be disabled by default so use Ethernet or the micro USB console to configure Wi-Fi again Signed-off-by: Andrew Yong <me@ndoo.sg>
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
5 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0ebf471802..3d3aa0ac01 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -311,6 +311,9 @@ vocore)
ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
set_wifi_led "$board:green:status"
;;
+vocore2)
+ set_wifi_led "$board:fuchsia:status"
+ ;;
w502u)
set_usb_led "$board:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index daf9b33a74..e84a52d4a6 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -249,6 +249,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
;;
+ vocore2)
+ ucidef_add_switch "switch0" \
+ "0:lan" "2:lan" "6t@eth0"
+ ;;
f5d8235-v1|\
tew-714tru|\
v11st-fe|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a22be5e3d4..0b5bfeb589 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -206,6 +206,9 @@ get_status_led() {
v22rw-2x2)
status_led="$board:green:security"
;;
+ vocore2)
+ status_led="$board:fuchsia:status"
+ ;;
w306r-v20|\
witi|\
zbt-wr8305rt)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 9b82b2a5c1..895f3ae224 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -475,6 +475,9 @@ ramips_board_detect() {
*"VoCore (16M)")
name="vocore-16M"
;;
+ *"VoCore2")
+ name="vocore2"
+ ;;
*"VR500")
name="vr500"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c097cfa218..ce2c2221f2 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -133,6 +133,7 @@ platform_check_image() {
ur-336un|\
v22rw-2x2|\
vocore|\
+ vocore2|\
vr500|\
w150m|\
w2914nsv2|\