aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorMaxim Anisimov <maxim.anisimov.ua@gmail.com>2018-01-09 14:25:53 +0300
committerMathias Kresin <dev@kresin.me>2018-01-15 21:45:43 +0100
commit5bdd238b634a34b038fbea9046893de29a77c000 (patch)
treebe539d819e8fc80905b6574132ceebd081b9fb56 /target/linux/ramips/base-files
parentff1e89553078cb1f8851276537d1267930d740df (diff)
downloadupstream-5bdd238b634a34b038fbea9046893de29a77c000.tar.gz
upstream-5bdd238b634a34b038fbea9046893de29a77c000.tar.bz2
upstream-5bdd238b634a34b038fbea9046893de29a77c000.zip
ramips: add support for TP-Link Archer C20 v4
TP-Link Archer C20 v4 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 5x 10/100 Mbps Ethernet - 3x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power input switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. * MT7610EN ac chip isn't not supported by LEDE. Therefore 5Ghz won't work. Flash instruction: The only way to flash LEDE image in ArcherC20v4 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC20v4-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
4 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 37393eeb27..0b0feb4156 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -388,6 +388,11 @@ tplink,c20-v1)
set_usb_led "$boardname:blue:usb"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
+tplink,c20-v4)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
+ ;;
tplink,tl-mr3420-v5)
set_usb_led "$boardname:green:usb"
set_wifi_led "$boardname:green:wlan"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index a90fe96f91..7deebbcef0 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -173,6 +173,7 @@ ramips_setup_interfaces()
mzk-wdpr|\
rb750gr3|\
rt-n14u|\
+ tplink,c20-v4|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index df9858cb32..cf37fcf487 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -38,6 +38,7 @@ get_status_led() {
nbg-419n2|\
pwh2004|\
r6220|\
+ tplink,c20-v4|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 71ad0c1b83..bce49a61d7 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -241,6 +241,7 @@ platform_check_image() {
c50|\
mr200|\
tplink,c20-v1|\
+ tplink,c20-v4|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\