aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/lib
diff options
context:
space:
mode:
authorCezary Jackiewicz <cezary@eko.one.pl>2018-04-19 19:34:22 +0200
committerMathias Kresin <dev@kresin.me>2018-08-15 07:42:36 +0200
commit37af596593b0e84d0a076ab8f173066e3d7bc810 (patch)
treefc009e33abc46962259afc72a392f7023889ef47 /target/linux/ramips/base-files/lib
parent4877ad44c718debfa75533aedaaf3dfd0faeb6f0 (diff)
downloadupstream-37af596593b0e84d0a076ab8f173066e3d7bc810.tar.gz
upstream-37af596593b0e84d0a076ab8f173066e3d7bc810.tar.bz2
upstream-37af596593b0e84d0a076ab8f173066e3d7bc810.zip
ramips: add support for D-Link DWR-118-A2
The DWR-118-A2 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612EN) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Marvell Ethernet PHY (1 LAN) - 2x external, non-detachable antennas - 1x USB 2.0 - UART (J1) header on PCB (57600 8n1) - 7x LED (5x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - GELAN not working - flash is very slow The status led has been assigned to the dwr-118-a2:green:internet led. At the end of the boot it is switched off and is available for other operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/lib')
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a102a0bf7a..67c032cb8a 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -289,6 +289,7 @@ platform_check_image() {
return 0
;;
dlink,dwr-116-a1|\
+ dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
dwr-512-b)
[ "$magic" != "0404242b" ] && {