diff options
| author | Franz Flasch <franz.flasch@gmx.at> | 2018-05-17 11:57:00 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-06-25 20:52:18 +0200 |
| commit | 8375623a064037bbdd914bd9e7529eefa7172560 (patch) | |
| tree | a421512693dc16efa1fc642a378184db41606d6e /target/linux/ramips/base-files/lib/upgrade/platform.sh | |
| parent | abb7524683cbc0185ee2d0b590c045065de354b7 (diff) | |
| download | upstream-8375623a064037bbdd914bd9e7529eefa7172560.tar.gz upstream-8375623a064037bbdd914bd9e7529eefa7172560.tar.bz2 upstream-8375623a064037bbdd914bd9e7529eefa7172560.zip | |
ramips: add support for TP-Link Archer C2
Specification:
- System-On-Chip: MT7620A
- CPU/Speed: 580 MHz
- Flash-Chip: Winbond 25Q64BVSIG
- Flash size: 8192 KiB
- RAM: 64 MiB
- Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn
- Wireless No2: On-board chip: MT7610EN 5GHz 802.11ac
- Switch: RTL8367RB Gigabit Switch
- USB: Yes 1 x 2.0
Preparing a TFTP recovery image for initial flashing:
Currently the only method to install openwrt for the first time is via
TFTP download in u-boot. After first install you can use regular updates.
WARNING: This method also overwrites the bootloader partition!
Create a TFTP recovery image:
1) Download a stock TP-Link Firmware file here:
https://www.tp-link.com/en/download/Archer-C2_V1.html#Firmware
2) Extract u-boot from the binary file:
#> dd if=c2v1_stock_firmware.bin of=c2v1_uboot.bin bs=1 skip=512 count=131072
3) Now merge the sysupgrade image and the u-boot into one binary:
#> cat c2v1_uboot.bin openwrt-squashfs-sysupgrade.bin > ArcherC2V1_tp_recovery.bin
The resulting image can be flashed via TFTP recovery mode.
Flash instructions:
1) To flash the recovery image, start a TFTP server from IP address
192.168.0.66 and serve the recovery image named
ArcherC2V1_tp_recovery.bin.
2) Connect your device to the LAN port, then press the WPS/Reset button
and power it up. Keep pressing the WPS/Reset button for 10 seconds.
It will try to download the recovery image and flash it.
It can take up to 20-25 minutes to finish. When it reaches 100%, the
router will reboot itself.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
Diffstat (limited to 'target/linux/ramips/base-files/lib/upgrade/platform.sh')
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index ffdc5e73e0..26236047b4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -253,6 +253,7 @@ platform_check_image() { c20i|\ c50|\ mr200|\ + tplink,c2-v1|\ tplink,c20-v1|\ tplink,c20-v4|\ tplink,c50-v3|\ |