diff options
| author | Henryk Heisig <hyniu@o2.pl> | 2017-12-15 15:57:49 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-12-23 15:35:52 +0100 |
| commit | 39e9bfb18199b046bd3b613002112e4e6dd53658 (patch) | |
| tree | ce67800be1fe11212ebe26592907817008b37aa0 /target/linux/ramips/base-files/lib/upgrade/platform.sh | |
| parent | 8ca650b8ce22fe2175cf15cfdd0e25206dd77481 (diff) | |
| download | upstream-39e9bfb18199b046bd3b613002112e4e6dd53658.tar.gz upstream-39e9bfb18199b046bd3b613002112e4e6dd53658.tar.bz2 upstream-39e9bfb18199b046bd3b613002112e4e6dd53658.zip | |
ramips: add support for TP-Link TL-MR3420 v5
TP-Link TL-MR3420 v5 are simple N300 router with
5-port FE switch and non-detachable antennas.
Its very similar to TP-Link TL-WR841N V13.
Specification:
- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- USB 2.0 Port
- UART (J1) header on PCB (115200 8n1)
- 8x LED, 2x button, power input switch
Flash instruction:
The only way to flash LEDE image in mr3420v5 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux/ramips/base-files/lib/upgrade/platform.sh')
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 68b47eeba0..8160f5d388 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -240,6 +240,7 @@ platform_check_image() { c20i|\ c50|\ mr200|\ + tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13) |