aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/lib/upgrade/platform.sh
diff options
context:
space:
mode:
authorHanqing Wong <hquu@outlook.com>2017-03-11 15:44:33 +0800
committerMathias Kresin <dev@kresin.me>2017-03-12 09:28:05 +0100
commit38bee61dab029a7608088f64da71c19cfc8cf267 (patch)
treeb54962eab8dc64eb7976bc1c37348c0577b81791 /target/linux/ramips/base-files/lib/upgrade/platform.sh
parent562484f25c535ef01a004d11b23243a36bcc50c9 (diff)
downloadupstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.gz
upstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.bz2
upstream-38bee61dab029a7608088f64da71c19cfc8cf267.zip
ramips: add support for Netgear R6220
This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong <hquu@outlook.com>
Diffstat (limited to 'target/linux/ramips/base-files/lib/upgrade/platform.sh')
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh4
1 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3245e2c1c8..7b12d97a00 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -229,7 +229,8 @@ platform_check_image() {
}
return 0
;;
- hc5962)
+ hc5962|\
+ r6220)
# these boards use metadata images
return 0
;;
@@ -266,6 +267,7 @@ platform_pre_upgrade() {
case "$board" in
hc5962|\
+ r6220|\
ubnt-erx)
nand_do_upgrade "$ARGV"
;;