diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-07-21 03:34:59 +0900 |
|---|---|---|
| committer | Chuanhong Guo <gch981213@gmail.com> | 2019-08-17 23:52:34 +0800 |
| commit | 2678ba909329aa8ffcf213c4b63bb1b001dd1a8c (patch) | |
| tree | cdda148ae2361f1258a77b0e29f64638bae9594d /target/linux/ramips/base-files/etc | |
| parent | 68588e15184fe4b1fa99ccf969ee314cf55bc02e (diff) | |
| download | upstream-2678ba909329aa8ffcf213c4b63bb1b001dd1a8c.tar.gz upstream-2678ba909329aa8ffcf213c4b63bb1b001dd1a8c.tar.bz2 upstream-2678ba909329aa8ffcf213c4b63bb1b001dd1a8c.zip | |
ramips: add support for ipTIME A604M
ipTIME A604M is a 2.4/5GHz band AC1200 router, based on MediaTek
MT7628AN.
Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7612EN
- Ethernet: 5x 10/100Mbps
- Switch: SoC internal
- UART:
- J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index b413b434eb..e9f4e98fa5 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -305,7 +305,8 @@ ramips_setup_interfaces() elecom,wrc-2533gst|\ huawei,hg255d|\ iodata,wn-ax1167gr|\ - iodata,wn-gx300gr) + iodata,wn-gx300gr|\ + iptime,a604m) ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; @@ -616,6 +617,9 @@ ramips_setup_macs() trendnet,tew-692gr) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; + iptime,a604m) + wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) + ;; lenovo,newifi-d1) lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; |