diff options
| author | Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> | 2018-07-16 07:19:19 -0700 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-08-06 07:05:37 +0200 |
| commit | f72fa883b324311c1972c39ed521e536b25d674c (patch) | |
| tree | c586f1a9c384205b04569e75d4d86d99f3346b7b /target/linux/ramips/base-files/etc | |
| parent | ad5c2897ec054b80549e526ef639dd75548d4747 (diff) | |
| download | upstream-f72fa883b324311c1972c39ed521e536b25d674c.tar.gz upstream-f72fa883b324311c1972c39ed521e536b25d674c.tar.bz2 upstream-f72fa883b324311c1972c39ed521e536b25d674c.zip | |
ramips: add support for Edimax BR-6478AC v2
Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie.
Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated.
Specification:
- System-On-Chip: MT7620A
- CPU/Speed: 580 MHz
- Flash-Chip: Macronix MX25L6405D
- Flash size: 8192 KiB
- RAM: 64 MiB
- Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn
- Wireless No2: On-board chip: MT7612E 5GHz 802.11ac
- Switch: Mediatek MT7530W Gigabit Switch
- USB: Yes 1 x 2.0
Installation:
1. Download sysupgrade.bin
2. Open vendor web interface
3. Choose to upgrade firmware
4. After reboot connect via ethernet at 192.168.1.1
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 6 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 5 |
2 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 6dec7a10a1..0d5a2e97c2 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -86,6 +86,12 @@ asl26555-16M) bc2) set_usb_led "$boardname:blue:usb" ;; +br-6478ac-v2) + ucidef_set_led_default "power" "POWER" "$boardname:white:power" "1" + ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2" + set_wifi_led "$boardname:blue:wlan" + set_usb_led "$boardname:blue:usb" + ;; broadway) set_usb_led "$boardname:red:diskmounted" set_wifi_led "$boardname:red:wps_active" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7d5f09c35c..5be50f48c3 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -341,6 +341,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; + br-6478ac-v2|\ tplink,c2-v1) ucidef_add_switch "switch1" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" @@ -446,6 +447,10 @@ ramips_setup_macs() lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(mtd_get_mac_binary devdata 7) ;; + br-6478ac-v2) + lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 2) + ;; cy-swr1100|\ dch-m225) lan_mac=$(mtd_get_mac_ascii factory lanmac) |