aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2018-03-19 19:15:29 +0100
committerPetr Štetiar <ynezz@true.cz>2019-03-24 01:44:24 +0100
commit67fced9ba336dd69c5a35aec3157db4b158a9e2d (patch)
tree1203504bb73e691a34c91a686dc051d88f17f913 /target/linux/ramips/base-files/etc
parent1f149fcad38677cc917d249e32b4b791cde95702 (diff)
downloadupstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.gz
upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.bz2
upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.zip
ramips: add support for DLINK DIR-510L
The DIR-510L Wireless Router are based on the MT7620A SoC. Specification: -MediaTek MT7620A (580 Mhz) -128 MB of RAM -16 MB of FLASH -802.11bgn radio -1x 10/100 Mbps Ethernet -2x internal, non-detachable antennas -UART (J3) header on PCB (57600 8n1) -1x bi-color LED (GPIO-controlled), 2x button -JBOOT bootloader Known issues: -Ethernet port is used as LAN -No communication with charger IC. (uart bitbang needed) Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [fixed whitespace issue in 10-rt2x00-eeprom] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network2
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/03_gpio_switches4
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
3 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index bf71aef5ec..bb5ff483c4 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -365,6 +365,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
;;
+ dlink,dir-510l|\
re350-v1)
ucidef_add_switch "switch0" \
"0:lan" "6@eth0"
@@ -513,6 +514,7 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_ascii factory lanmac)
wan_mac=$(mtd_get_mac_ascii factory wanmac)
;;
+ dlink,dir-510l|\
dlink,dwr-116-a1|\
dlink,dwr-118-a1|\
dlink,dwr-118-a2|\
diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
index a5f9124d12..80e3c4c41f 100755
--- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
@@ -7,6 +7,10 @@ board_config_update
board=$(board_name)
case "$board" in
+dlink,dir-510l)
+ ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
+ ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
+ ;;
mikrotik,rb750gr3)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 96a2397191..fc044c123e 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -54,6 +54,7 @@ board=$(board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
+ dlink,dir-510l|\
dlink,dwr-116-a1|\
dlink,dwr-118-a1|\
dlink,dwr-118-a2|\