aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorDeng Qingfang <dengqf6@mail2.sysu.edu.cn>2018-12-27 13:39:16 +0800
committerMathias Kresin <dev@kresin.me>2018-12-29 16:03:30 +0100
commit5580a9dd314be953fdac9827d7819058af9bea20 (patch)
tree9fc079ae117f07da16677b7ca02ab6efb174416e /target/linux/ramips/base-files/etc
parent0599cd90e185860bbddd7dea8899f29b82368050 (diff)
downloadupstream-5580a9dd314be953fdac9827d7819058af9bea20.tar.gz
upstream-5580a9dd314be953fdac9827d7819058af9bea20.tar.bz2
upstream-5580a9dd314be953fdac9827d7819058af9bea20.zip
ramips: add support for GeHua GHL-R-001
Specs SoC: MT7621AT RAM: 512MiB Flash: 32MiB MX25L25635F SPI NOR 2.4G: MT7603EN 5G: MT7612EN Ethernet: 4x GE ports (1x WAN, 3x LAN) with link status LEDs USB 3.0 LEDs: POWER, 5G WIFI, 2.4G WIFI, USB, Internet. The last two ones are controlled by GPIO UART: There are 2 UARTs (UARTLITE1/ttyS0 and UARTLITE3/ttyS1) on board. UARTLITE1 is close to LEDs, and UARTLITE3 is close to flash chip. The stock u-boot uses UARTLITE1 by default. Baud rate is 57600 Flash instruction 1. telnet 192.168.9.1 2317, username is "root" and password is "admin" One can alternatively use UART to log in 2. Put OpenWrt firmware in a FAT32 USB drive, and connect it to the router One can alternatively download the firmware via wget through Internet 3. mtd write /path/to/openwrt.bin firmware 4. reboot Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 35a28174cc..d5238776c2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -254,6 +254,7 @@ netgear,r6120)
oy-0001)
set_wifi_led "$boardname:green:wifi"
;;
+gehua,ghl-r-001|\
pbr-m1)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f958ac2bd0..2dbd891574 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -142,6 +142,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
+ gehua,ghl-r-001)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+ ;;
alfa-network,awusfree1|\
cs-qr10|\
d105|\