aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-03-21 15:55:09 +0100
committerPetr Štetiar <ynezz@true.cz>2019-03-29 07:34:00 +0000
commit3f019bf96cdf52668750f67cb139fa1b5c538f0b (patch)
treebac3ef1accb91a010a6adff664df8ace4a888b38 /target/linux/ramips/base-files/etc
parent58becdb30d1048903ad704a227a52bdf695a0087 (diff)
downloadupstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.gz
upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.bz2
upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.zip
ramips: add Netgear EX6150
SoC: MediaTek MT7621 RAM: 64M (Winbond W9751G6KB-25) FLASH: 16MB (Macronix MX25L12835F) WiFi: MediaTek MT7662E bgn 2SS WiFi: MediaTek MT7662E nac 2SS BTN: ON/OFF - Reset - WPS - AP/Extender toggle LED: - Arrow Right (blue) - Arrow Left (blue) - WiFi 1 (red/green) - WiFi 2 (red/green) - Power (green/amber) - WPS (Green) UART: UART is present as Pads on the backside of the PCB. They are located on the other side of the Ethernet port. 3.3V - GND - TX - RX / 57600-8N1 3.3V is the nearest one to the antenna connectors Installation ------------ Update the factory image via the Netgear web-interfaces (by default: 192.168.1.250/24). You can also use the factory image with the nmrpflash tool. For more information see https://github.com/jclehner/nmrpflash Signed-off-by: David Bauer <mail@david-bauer.net> [merge conflict in 02_network, flash@0 node rename, wlan DTS triggers] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f9f1e208f6..2df9259021 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -366,6 +366,7 @@ ramips_setup_interfaces()
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
;;
dlink,dir-510l|\
+ netgear,ex6150|\
re350-v1)
ucidef_add_switch "switch0" \
"0:lan" "6@eth0"