diff options
| author | Marcel Jost <majo@icutech.ch> | 2018-12-18 08:00:52 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-02-28 11:26:10 +0100 |
| commit | e6f047fa368ca9c90691b93aa5e03068fe1f4178 (patch) | |
| tree | abd31c89fe10092ce9420a07251de6718a157916 /target/linux/ramips/base-files/etc | |
| parent | a915ad8464341c01ddd894ac36483183ab4c4130 (diff) | |
| download | upstream-e6f047fa368ca9c90691b93aa5e03068fe1f4178.tar.gz upstream-e6f047fa368ca9c90691b93aa5e03068fe1f4178.tar.bz2 upstream-e6f047fa368ca9c90691b93aa5e03068fe1f4178.zip | |
ramips: add TP-Link TL-WR802N-v4 support
This patch adds support for the TP-Link TL-WR802N-v4.
https://openwrt.org/toh/tp-link/tl-wr802n
Specification:
- MT7628N (580 MHz)
- 64 MB RAM
- 8 MB FLASH
- 2T2R 2.4 GHz
- 1x 10/100 Mbps Ethernet
- 1x LED
Flash instruction:
The only way to flash the image in TL-WR802N v4 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr802n-v4-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with the LAN port, press the reset button, power up
the router and keep button pressed for around 10 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Marcel Jost <majo@icutech.ch>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f47d6f895d..f968aafc8e 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -161,6 +161,7 @@ ramips_setup_interfaces() ravpower,wd03|\ tama,w06|\ tplink,tl-mr3020-v3|\ + tplink,tl-wr802n-v4|\ u25awf-h1|\ wli-tx4-ag300n|\ wmdr-143n|\ |