diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-03-19 19:15:29 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-03-24 01:44:24 +0100 |
| commit | 67fced9ba336dd69c5a35aec3157db4b158a9e2d (patch) | |
| tree | 1203504bb73e691a34c91a686dc051d88f17f913 /target/linux/ramips/base-files/etc | |
| parent | 1f149fcad38677cc917d249e32b4b791cde95702 (diff) | |
| download | upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.gz upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.tar.bz2 upstream-67fced9ba336dd69c5a35aec3157db4b158a9e2d.zip | |
ramips: add support for DLINK DIR-510L
The DIR-510L Wireless Router are based on the MT7620A SoC.
Specification:
-MediaTek MT7620A (580 Mhz)
-128 MB of RAM
-16 MB of FLASH
-802.11bgn radio
-1x 10/100 Mbps Ethernet
-2x internal, non-detachable antennas
-UART (J3) header on PCB (57600 8n1)
-1x bi-color LED (GPIO-controlled), 2x button
-JBOOT bootloader
Known issues:
-Ethernet port is used as LAN
-No communication with charger IC. (uart bitbang needed)
Installation:
Apply factory image via d-link http web-gui.
How to revert to OEM firmware:
1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.)
2.) Upload original factory image via JBOOT http (IP: 192.168.123.254)
3.) If http doesn't work, it can be done with curl command:
curl -F FN=@XXXXX.bin http://192.168.123.254/upg
where XXXXX.bin is name of firmware file.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[fixed whitespace issue in 10-rt2x00-eeprom]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
3 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index bf71aef5ec..bb5ff483c4 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -365,6 +365,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" ;; + dlink,dir-510l|\ re350-v1) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" @@ -513,6 +514,7 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_ascii factory lanmac) wan_mac=$(mtd_get_mac_ascii factory wanmac) ;; + dlink,dir-510l|\ dlink,dwr-116-a1|\ dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches index a5f9124d12..80e3c4c41f 100755 --- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches @@ -7,6 +7,10 @@ board_config_update board=$(board_name) case "$board" in +dlink,dir-510l) + ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" + ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" + ;; mikrotik,rb750gr3) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 96a2397191..fc044c123e 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -54,6 +54,7 @@ board=$(board_name) case "$FIRMWARE" in "soc_wmac.eeprom") case $board in + dlink,dir-510l|\ dlink,dwr-116-a1|\ dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ |