diff options
| author | Pavel Kubelun <be.dissent@gmail.com> | 2017-08-12 17:56:11 +0300 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-08-23 14:59:12 +0200 |
| commit | 6e283cdc0da25928f8148805ebef7f8f2b769ee8 (patch) | |
| tree | 532335271e41ba1cd18ca931c2ed5b865d11554d /target/linux/ramips/base-files/etc | |
| parent | 4fce22e88f21733b62c30de65eec94bc8630cba5 (diff) | |
| download | upstream-6e283cdc0da25928f8148805ebef7f8f2b769ee8.tar.gz upstream-6e283cdc0da25928f8148805ebef7f8f2b769ee8.tar.bz2 upstream-6e283cdc0da25928f8148805ebef7f8f2b769ee8.zip | |
ramips: add Xiaomi Mi Router 3G support
This commit adds support for Xiaomi Mi WiFi Router 3G.
Short specification:
- MT7621AT + MT7603EN + 7612EN
- 256MB DDR3 RAM
- 128MB NAND flash
- 1+2 x 1000M Ethernet
- 1x USB 3.0 port
- reset button
- yellow, blue, red leds
Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: mtd erase kernel0
- run: reboot
Originally stock firmware has following partitions:
- ...
- kernel0 (primary kernel image)
- kernel1 (secondary kernel image, used by u-boot in failsafe routine)
- rootfs0 (primary rootfs)
- rootfs1 (secondary rootfs in case primary fails)
- overlay (used as ubi overlay)
This commit squashes rootfs0, rootfs1 and overlay partitions into 1, so
it can be used by LEDE fully for package installation, resulting in 117,5MiB.
This device lacks hw watchdog, so adding softdog instead (stock does the same).
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rw-r--r-- | target/linux/ramips/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 7 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 |
3 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index a2d5c2e7de..ff5d156f2c 100644 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -242,6 +242,10 @@ miniembplug) set_wifi_led "$board:red:wlan" set_usb_led "$board:green:mobile" ;; +mir3g) + ucidef_set_led_netdev "eth" "Ethernet" "$board:red:wan" "eth0" + set_usb_led "$board:blue:usb" + ;; miwifi-mini) ucidef_set_led_default "power" "power" "$board:red:status" "1" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2f001134a2..df70a8b2ec 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -122,6 +122,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + mir3g) + ucidef_add_switch "switch0" \ + "1:wan" "2:lan:2" "3:lan:1" "6@eth0" + ;; psg1218b) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" @@ -421,6 +425,9 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory_info 13) wan_mac=$(macaddr_add "$lan_mac" 1) ;; + mir3g) + lan_mac=$(mtd_get_mac_binary Factory e006) + ;; miwifi-mini) wan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_setbit_la "$wan_mac") diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 5278830eb7..960e189283 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -177,6 +177,9 @@ get_status_led() { m4-8M) status_led="m4:blue:status" ;; + mir3g) + status_led="$board:yellow:status" + ;; miwifi-mini|\ zte-q7) status_led="$board:red:status" |