aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorKristian Evensen <kristian.evensen@gmail.com>2017-02-04 21:28:52 +0100
committerJo-Philipp Wich <jo@mein.io>2017-04-28 17:09:45 +0200
commit49ce6d04b0fa56facd37924003df02b4ebf14aab (patch)
tree471f0002df689b5d2583cc5e87fede4e6b1663c7 /target/linux/ramips/base-files/etc
parent58ec566331d05dc80e42347bd846a65077c2f735 (diff)
downloadupstream-49ce6d04b0fa56facd37924003df02b4ebf14aab.tar.gz
upstream-49ce6d04b0fa56facd37924003df02b4ebf14aab.tar.bz2
upstream-49ce6d04b0fa56facd37924003df02b4ebf14aab.zip
ramips: add support for Sanlinking D240
The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
3 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 545d6a4a6d..4e6eeb26ba 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -109,6 +109,10 @@ d105)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
set_usb_led "$board:green:usb"
;;
+d240)
+ set_wifi_led "$board:blue:wifi"
+ set_usb_led "$board:blue:usb"
+ ;;
db-wrt01)
ucidef_set_led_default "power" "power" "$board:orange:power" "1"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index cc092b1639..af5a951ca5 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -73,6 +73,7 @@ ramips_setup_interfaces()
3g-6200n|\
ac1200pro|\
ai-br100|\
+ d240|\
db-wrt01|\
dir-300-b7|\
dir-320-b1|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 94998333b3..4ed18d7f0f 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -108,6 +108,7 @@ get_status_led() {
w502u)
status_led="$board:blue:wps"
;;
+ d240|\
dap-1350|\
na930|\
pbr-m1|\