aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorDaniel Kucera <daniel.kucera@gmail.com>2017-02-19 09:46:44 +0100
committerMathias Kresin <dev@kresin.me>2017-10-14 10:48:29 +0200
commit6f008af3f0b30d2af21ad6934c17b0ae69103ecd (patch)
tree38a4acdc3512354fa9befec44f591bcc831d0913 /target/linux/ramips/base-files/etc
parentf2b7d9dc1ca3d33f14961cf2885639f4f9e8965e (diff)
downloadupstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.gz
upstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.bz2
upstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.zip
ramips: add support for Kimax U25AWF-H1
Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection and battery, based on MediaTek MT7620A. Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643 Specification: - MT7620A CPU - 64 MB of RAM - 16 MB of FLASH - 802.11bgn WiFi - 1x 10/100 Mbps Ethernet - USB 2.0 Host - UART for serial console Flash instruction: 1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin 2. Open webinterface a upgrade 3. After boot connect via ethernet to ip 192.168.1.1 Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com> [fix reset button gpio, don't add a lan/wan vlan config for single port board, add -H1 suffix do make sure that this revision of the board is supported/tested] Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
3 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index c871dc4e48..75ab0da741 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -368,6 +368,10 @@ tl-wr841n-v13)
ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
;;
+u25awf-h1)
+ set_wifi_led "u25awf:red:wifi"
+ ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
+ ;;
vocore-8M|\
vocore-16M)
ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index a1a82d62ed..1c8505e8c7 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -237,6 +237,7 @@ ramips_setup_interfaces()
mzk-ex750np|\
na930|\
pbr-d1|\
+ u25awf-h1|\
wli-tx4-ag300n|\
wmdr-143n|\
wmr-300|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 0345f1e8bf..4411babbf9 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -238,6 +238,9 @@ get_status_led() {
sap-g3200u3)
status_led="$board:green:usb"
;;
+ u25awf-h1)
+ status_led="u25awf:red:wifi"
+ ;;
v22rw-2x2)
status_led="$board:green:security"
;;