aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>2018-07-16 07:19:19 -0700
committerJohn Crispin <john@phrozen.org>2018-08-06 07:05:37 +0200
commitf72fa883b324311c1972c39ed521e536b25d674c (patch)
treec586f1a9c384205b04569e75d4d86d99f3346b7b /target/linux/ramips/base-files/etc
parentad5c2897ec054b80549e526ef639dd75548d4747 (diff)
downloadupstream-f72fa883b324311c1972c39ed521e536b25d674c.tar.gz
upstream-f72fa883b324311c1972c39ed521e536b25d674c.tar.bz2
upstream-f72fa883b324311c1972c39ed521e536b25d674c.zip
ramips: add support for Edimax BR-6478AC v2
Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network5
2 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 6dec7a10a1..0d5a2e97c2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -86,6 +86,12 @@ asl26555-16M)
bc2)
set_usb_led "$boardname:blue:usb"
;;
+br-6478ac-v2)
+ ucidef_set_led_default "power" "POWER" "$boardname:white:power" "1"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan"
+ set_usb_led "$boardname:blue:usb"
+ ;;
broadway)
set_usb_led "$boardname:red:diskmounted"
set_wifi_led "$boardname:red:wps_active"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7d5f09c35c..5be50f48c3 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -341,6 +341,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
;;
+ br-6478ac-v2|\
tplink,c2-v1)
ucidef_add_switch "switch1" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
@@ -446,6 +447,10 @@ ramips_setup_macs()
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(mtd_get_mac_binary devdata 7)
;;
+ br-6478ac-v2)
+ lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 2)
+ ;;
cy-swr1100|\
dch-m225)
lan_mac=$(mtd_get_mac_ascii factory lanmac)