aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2018-01-26 16:21:34 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2018-02-22 23:40:11 +0100
commitf1c193c27e714a051b49788fff3aecbd728190e1 (patch)
tree96de333820159b99516114bf11b68b361674c351 /target/linux/ramips/base-files/etc
parent8c64824576598117958691853de68bf4dcfc3c06 (diff)
downloadupstream-f1c193c27e714a051b49788fff3aecbd728190e1.tar.gz
upstream-f1c193c27e714a051b49788fff3aecbd728190e1.tar.bz2
upstream-f1c193c27e714a051b49788fff3aecbd728190e1.zip
ramips: add support for ALFA Network AWUSFREE1
ALFA Network AWUSFREE1 is an USB Wi-Fi N300 adapter based on MT7628. Specification: - MT7628AN (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (MT7628) with external FEM (RFFM4203) - 2x detachable antennas (RP-SMA) - ASIX AX88772 USB to Ethernet bridge (connected with MT7628 PHY0) - 4x LED (2 driven by GPIO) - 1x button (reset) - 1x mini USB for host and main power input - UART header on PCB Flash instruction: You can use sysupgrade image directly in vendor firmware which is based on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot: 1. Power device with reset button pressed and release it after ~5 sec. 2. Setup static IP 192.168.1.2/4 on your PC. 3. Go to 192.168.1.1 in browser and upload "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network41
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
3 files changed, 27 insertions, 20 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 515656f647..0a870d9f6c 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -60,6 +60,9 @@ alfa-network,ac1200rm)
set_wifi_led "$boardname:green:wlan2g" "wlan1"
ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
;;
+alfa-network,awusfree1)
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
all0256n-4M|\
all0256n-8M)
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index fe19a226f8..d23f9e36e3 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -126,6 +126,27 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
+ alfa-network,awusfree1|\
+ cs-qr10|\
+ d105|\
+ dlink,dap-1522-a1|\
+ dch-m225|\
+ ex2700|\
+ ex3700|\
+ hpm|\
+ mzk-ex300np|\
+ mzk-ex750np|\
+ na930|\
+ pbr-d1|\
+ tama,w06|\
+ u25awf-h1|\
+ wli-tx4-ag300n|\
+ wmdr-143n|\
+ wmr-300|\
+ wn3000rpv3|\
+ wrh-300cr)
+ ucidef_set_interface_lan "eth0"
+ ;;
mir3g)
ucidef_add_switch "switch0" \
"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
@@ -237,26 +258,6 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
;;
- cs-qr10|\
- d105|\
- dlink,dap-1522-a1|\
- dch-m225|\
- ex2700|\
- ex3700|\
- hpm|\
- mzk-ex300np|\
- mzk-ex750np|\
- na930|\
- pbr-d1|\
- tama,w06|\
- u25awf-h1|\
- wli-tx4-ag300n|\
- wmdr-143n|\
- wmr-300|\
- wn3000rpv3|\
- wrh-300cr)
- ucidef_set_interface_lan "eth0"
- ;;
duzun-dm06)
ucidef_add_switch "switch0" \
"1:lan" "0:wan" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index c5f62ab66d..6038804b12 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -78,6 +78,9 @@ get_status_led() {
wrh-300cr)
status_led="$boardname:green:wps"
;;
+ alfa-network,awusfree1)
+ status_led="$boardname:orange:system"
+ ;;
all0239-3g|\
dcs-930|\
dir-300-b1|\